PS-15-25-L

?輸入電壓100-240VAC

?輸出±15V ,+400/-250mA

?Lemo ^® 插頭，屏蔽輸出線

?避免接地回路的非固定式設(shè)計(jì)

?短路被保護(hù)

?適用于所有FEMTO模塊

Features

Linear Regulated Stabilization ± 15 VDC
Low Ripple and Noise
Wide Input Range Switched Power Supply

Safety Instructions

This power supply is exclusively designed for use with FEMTO amplifier modules. Before use,

take care to follow general electrical safety rules and notice the information n in this

datasheet and at the type label on the power supply. Do not use visibly damaged power

supplies. Do not use this power supply in security relevant applications or in chemical

aggressive environment. Do not expose this power supply to unusual mechanical stress or

vibrations. During use do not expose the unit to direct sunlight and do not cover it because

cooling is made by convection. Respect the general rules for fire prevention. Use in original

condition only, do not open, do not repair the unit. When operation is no longer possible or

considered to be unsafe, the power supply must be taken out of service and be secured

against unintended operation.

Environmental Protection

FEMTO offers all end users in the EC the possibility to return “end of life” units without

incurring disposal charges. If you wish to return a unit for waste recovery, please contact

FEMTO for further information. Do not dispose of the unit in a litter bin or at a public waste

disposal site.

Specifications Test Conditions Ta = 25°C
Input Input Voltage 100...240 VAC, ± 10%, 47…63 Hz
Power Consumption, no load 2.3 W typ.
Power Consumption, max. load 20 W max
Inrush current max. 15 A @115VAC max. 30 A @230 VAC.
Output Output Voltage ± 15 VDC, ± 5%
+ 5 VDC (not connected to the output connector)
Output Current + 500 mA / - 300 mA max.
Ripple and Noise 20 mVpp typ. (@ ± 150 mA load)
Protections Insulation Voltage, prim./sec. 4242 VDC
Insulation Resistance, prim./sec. 10 GΩ min. (@ 500 VDC)
Temperature Protection installed
Overload Protection short-circuit-proof
No Load Protection idle-running-proof