PTL塑料漏斗裝置

PTL塑料顆粒倒入漏斗能力是通過測量傾斜而下的時(shí)間和觀察倒入方式來確定粒狀塑料的倒入能力

參照標(biāo)準(zhǔn)：ISO 6186 / 1998-06-15&5 Fig. 1b), DIN 53 492 / November 1992 Fig. 1 and 2

PTL Plastic Granule Pour ability Funnel

for determining the pour ability of granular plastics by measuring their time of pouring down and by observing the manner of pouring.

according to ISO 6186 / 1998-06-15 &5 Fig. 1b), DIN 53 492 / November 1992 Fig. 1 and 2

Standard Outfit:

1 funnel, bevel angle inside 40°±5', small inside diameter 30+0,1 mm, large inside diameter approx. 110 mm, with socket bore for an earth line,

1 union nut, knurled, for fixing one of the nozzles to the funnel, 1 base plate, with stａnd rod and holder for the funnel,

1 device for closing the funnel outlet, adjustable in height, (balance and stopwatch are not part of the standard outfit).

Design: funnel of stainless steel (1.4301, 1.4305 or 1. 4541), union nut of bronze (CuSn) or brass (CuZn), nickel-plated, base plate and funnel holder of aluminum, base plate anodized, stａnd rod of stainless steel,

Article No.: V 36.42

Additional Outfit :

Nozzle,

bevel angle inside 40°±5'', fitting to the funnel, of stainless steel (1.4541 or 1.4571),

nozzle diameter of height Article

size: the outlet: approx.: No.:

1 10± 0,01 mm 29 mm V 36.45

2 15 ± 0,01 mm 22 mm V 36.46

3 25 ± 0,01 mm 8 mm V 36.48